MTHTrains Z-4000 Operator's Manual download pdf (Page 31)

DCS Command System User’s Guide

One-Touch Locomotive Operation

READ:

If you are adding or removing engines on

the track, press READ to update the

Active and Inactive Engine lists.

Alternately, you can change the active

status of each engine individually as

described in the “Selecting and Starting

the Locomotive” section in the “Quick

Start” chapter of this manual.

DOPPLER (0):

Press this button to activate the Proto-

Doppler feature for one-time use (LCD

will show Doppler = On” or “Doppler =

Off ”). Engine sounds will initially drop,

then build to a peak before fading away.

Press the DOPPLER button again after

the effect has played to turn the feature

off and return the locomotive to normal

engine sounds.

See the “Doppler Setup” instructions in the

“Advanced Menu” portion of the “Menu

Operation” chapter(s) for how to set an engine to

play the Doppler effect every time it passes a cer-

tain place on your layout.

E-STOP (Emergency Stop):

This button instantly cuts power to all

tracks connected to your TIU(s). You

need to turn off power at the transformer,

power down the remote, return power,

and re-access and start-up engines like a

new session in order to continue opera-

tion.

Note: If the TIU is powered by an auxiliary

power supply, that power source must be

unplugged and plugged back in before the TIU

will reset.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 147 148

No comments

MTHTrains Z-4000 Operator's Manual Page 31