MTHTrains 4-6-0 Steam Freight/Passenger Set Operations Instructions download pdf (Page 25)

To change your engine's Long Address using PoM:

1. Call up the current engine's address on your DCC handheld

2. Enter Programming on the Main on your DCC handheld

3. In this step you have to tell the MTH engine that you want it to start

looking at long addresses. You do this in CV29:

a. Bring up the CV menu on your DCC handheld

b. Enter “29” to edit CV29

c. Enter “36” to change the value of CV29 and hit Enter

d. The engine will give you a two whistle/horn blast response

4. In the following steps you will now need to write values to CV17 and

CV18 to tell the engine what the long address should be

Feature/Factory Resetting

If all else fails and you aren't sure of something, never fear. You can always get

your engine back to a known state by either performing a Feature or Factory Reset.

There are a couple of ways to reset your MTH PS3.0-equipped engine:

Factory Resets – Clears everything – takes engine to just like it was

when you got it brand new

lSend a decimal 08 to CV 8 to reset everything

entirely back to factory default

lSend a decimal 192 to reset everything except user

speed tables

Feature Resets – There are a couple of Feature Resets that you can use

lPress F28 twice (toggling on then off). This resets the

smoke, volume and lights back to their defaults

lSend a decimal 64 for a Feature Reset. This resets

volumes, smoke and light settings.

lSend a decimal 128 to reset only address values back to

factory default

lThis is the same as writing 55 to CV55 to

engine address 55

Note: The engine address has to be

something other than address 55

Lost or Unknown Engine Address and the 55-55-55 Address Reset

In some cases you may not remember or have somehow lost the engine address.

Following the above Feature or Factory Resets will allow you to recover an engine. The

limitation to this is that for most resets you must know the engine address. If you are

RailKing 4-6-0 Steam Freight/Passenger Set with Proto-Sound® 3.0

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 57 58

No comments

MTHTrains 4-6-0 Steam Freight/Passenger Set Operations Instructions Page 25