MTHTrains 4-6-0 Steam Freight/Passenger Set Troubleshooting Guide download pdf (Page 18)

Passenger Car Light Bulb Replacement

If your Ready To Run Set came equipped with passenger cars use the below

instructions to replace the interior light bulbs.

STEP

Remove these

four screws

RailKing 4-6-0 Steam Freight/Passenger Set with Proto-Sound® 3.0

STEP

Remove these

two screws

Remove these

two screws

STEP

1) To remove the shell

from chassis remove the

four screws located

underneath the trucks.

2) With the four screws

removed, lower the chassis

from the shell, take care

not to pull the wires out.

3) To be able to separate

the interior from the shell

you need to remove the

screws from underneath

the interior. With the two

screws removed you can

then lower the interior

down from the shell.

LED Lighting

Gone are the incandescent bulbs. Your new PS3.0-equipped engine has LED

lighting. MTH uses various colored LED's to simulate the correct lighting on

your engines from the warm, yellow-orange colored light coming out of an old

lantern on your favorite steam engine to the high-intensity halogen lamp on the

latest modern diesels, LED's allow for various, correct colors. Also, they require

less power and do not emit as much heat as incandescent bulbs.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

No comments

MTHTrains 4-6-0 Steam Freight/Passenger Set Troubleshooting Guide Page 18