MTHTrains 4-6-0 Steam Freight/Passenger Set Operations Instructions download pdf (Page 7)

Basic Operation

The Throttle knob controls how fast your train will travel.

! Turn the throttle knob up ½-way, until the engine and caboose lights shine bright.

! Put the engine into motion by pressing the Direction button on your transformer

once. (hold it for approximately 1 second)

If the engine does not begin to move as soon as you firmly press the Direction button,

you may not have sent enough voltage to the track to make the train move. Turn the

throttle up a bit higher until the train begins to move.

Operation Buttons

Throttle To increase or decrease track voltage, and therefore train speed, turn the

throttle control knob. Turning it clockwise will increase voltage and speed, while turning

it counterclockwise will decrease voltage and speed. The engine will maintain the speed

you set after you release the throttle until you turn it again to change the voltage and

speed.

Horn/Whistle - To sound the whistle, firmly press the Horn/Whistle button. The horn

will sound for as long as you continue to depress the button. It will stop when you

release the button.

Bell - To sound the bell, firmly press the bell button. The bell sound will continue until

the bell button is firmly pressed a second time.

Direction Your train is programmed to start in neutral. The

train will always cycle neutral-forward-neutral-reverse with

each press and release of the direction button. The engine

is programmed to restart in neutral each time the track

voltage is turned off for 25 seconds or more.

Manual Volume Control

To adjust the volume of all sounds made by this

engine, turn the master volume control knob located

under the tender clockwise to increase the volume

and counter-clockwise to decrease the volume.

RailKing 4-6-0 Steam Freight/Passenger Set with Proto-Sound® 2.0

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

No comments

MTHTrains 4-6-0 Steam Freight/Passenger Set Operations Instructions Page 7